Calculators
Steam Tools
Fifteen working calculators built by i-Kcal engineers — the same arithmetic we use on plants, on the web. Free tools are embedded inside the lessons that teach them; the PRO set unlocks with a monthly access code.
| # | Tool | What it answers | Access |
|---|---|---|---|
| T01 | Steam Properties | Saturation temperature, enthalpies and specific volume at any pressure | Free |
| T02 | Line Sizing | Pipe diameter for a steam flow at sensible velocity | Free |
| T03 | Pressure Drop | What a run of pipe and fittings costs in pressure | PRO |
| T04 | Insulation | Surface heat loss and the case for lagging | PRO |
| T05 | Steam Consumption | How much steam a heating duty needs | Free |
| T06 | Tank Volume | Vessel volumes from dimensions | PRO |
| T07 | Boiler & Fuel | Fuel burn and cost for a steam duty, by fuel | PRO |
| T08 | F&A Rating | Nameplate evaporation vs actual, at your pressure and feed temperature | PRO |
| T09 | Trap Selection | Trap type and size for an application | PRO |
| T10 | Pipe Rating | Pressure–temperature ratings for pipe classes | PRO |
| T11 | Flash Recovery | Flash fraction and the recoverable duty | PRO |
| T12 | Leak Cost | What a hole of a given size costs per year | PRO |
| T13 | Steam Cost | The true ₹ per tonne of your steam | PRO |
| T14 | Jetomat ROI | Recovery economics of steam-jet recompression | PRO |
| T15 | Blowdown & TDS | Required blowdown rate and its recoverable heat | PRO |
The suite is live.
Open the
i-Kcal Steam Tools web app — the free tools are open to everyone; the PRO set unlocks
with a monthly access code from i-Kcal (ask through
www.i-kcal.com). Smaller free
calculators — the unit converter, steam-table lookup, saturation curve, T–h map, flash,
line-sizing, leak-cost and F&A calculators — run right inside the lessons that teach
them.